Assa Abloy 9M800 TCNE1 Series Especificações

Consulte online ou descarregue Especificações para Controladores de porta de segurança Assa Abloy 9M800 TCNE1 Series. Assa Abloy 9M800 TCNE1 Series Specifications Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 21
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
Installation Instructions
for 9800 TCNE1 Series Trim by ED5200N (S) (A)
and 9M800 TCNE1 Series Trim by ED5600N (A) with
Rim, SecureBolt™, and Mortise Exit Devices
Important: The accuracy of the door preparation is critical for proper functioning and security of this trim.
Misalignment can cause premature wear and a lessening of security.
Please read these instructions carefully to prevent missing important Steps.
Please Note: Improper installations may result in damage to the lock and void the factory warranty.
FM242B 12/08 (617417610)
1 2 3
4
7
5
8
0
6
9
#
*
For installation assistance contact Corbin Russwin Inc. at 1-800-810-WIRE (9473).
CAUTION
DOOR MUST REMAIN OPEN
DURING INSTALLATION.
USE DOOR STOP.
TEST
FOR PROPER
OPERATION
BEFORE
CLOSING
DOOR
Vista de página 0
1 2 3 4 5 6 ... 20 21

Resumo do Conteúdo

Página 1 - Installation Instructions

Installation Instructionsfor 9800 TCNE1 Series Trim by ED5200N (S) (A)and 9M800 TCNE1 Series Trim by ED5600N (A) with Rim, SecureBolt™, and Mortise E

Página 2 - Table of Contents

6) Installation Instructions (Rim and SecureBolt™)92a.For fire rated devices, feed keypad ribbon cable/connector and ground wire from outside of

Página 3 - 3) Features / Specifications

6) Installation Instructions (Rim and SecureBolt™)106.6) Installation of Inside Controller Escutcheon and Electrical ConnectionsInsideof DoorKey

Página 4 - (Rim and SecureBolt™)

11CAUTIO NDOOR MUST REMAIN OPENDURING INSTALLATION .USE DOOR STOP.TESTFOR PROPEROPERATIONBEFORECLOSINGDOOR6) Installation Instructions (Rim and Secure

Página 5 - 5) Switch Settings

7) 9M800 TCAC1 Series Trim Product Illustration (Mortise)12SolenoidWireHarness“B”“A”“B”“A”GroundWire8 Pin MolexDoorwire2 PinMethodeSolenoid2 PinMolex

Página 6 - (2) required

7) Installation Instructions (Mortise)13Fire Stop Plate7/8"1-1/21/8" Dia. holes(2) requiredSlotAttach Fire Stop Plate using self tapping scr

Página 7 - Check cylinder components

Insideof Door(2) #12x1" long flathead combination screw.Mortise Lock7) Installation Instructions (Mortise)147.3) Install Mortise Lock1. Feed So

Página 8 - (2) 1/4 - 20 Oval

7) Installation Instructions (Mortise) 157.4) Installation of Outside Trim and Exit DeviceOutside Trim AssemblyCoverSolenoidWire Harness“B”“A”“B”“A”D

Página 9

7) Installation Instructions (Mortise) 167.4) Installation of Outside Trim and Exit DeviceExit DeviceCoverSolenoidWire Harness“B”“A”“B”“A”DeviceFinge

Página 10

7) Installation Instructions (Mortise)17GASKET APPLICATION:Peel off the adhesive protective paper from gasket. Feed Keypad ribbon cable and ground wir

Página 11 - Electrical Connections

7) Installation Instructions (Mortise)187.6) Installation of Inside Controller Escutcheon and Electrical ConnectionsInsideof DoorKeypad Ribbon C

Página 12 - 6.7) Cover Installation

1) Warning2) General Description3) Features / Specifications4) Rim & SecureBolt™ TCNE1 Series Product Illustration5) Switch Settings (Rim

Página 13

19CAUTIO NDOOR MUST REMAIN OPENDURING INSTALLATION .USE DOOR STOP.TESTFOR PROPEROPERATIONBEFORECLOSINGDOOR6) Installation Instructions (Mortise)7.7)

Página 14 - 7.1) Before Starting

20Corbin Russwin, Inc. Technical Product Support:Corbin Russwin, Inc.Phone 800-810-WIRE (9493)225 Episcopal RoadBerlin, CT 06037-4004www.corbinrusswin

Página 15 - 7.3) Install Mortise Lock

2 General Description 2) General DescriptionsThe Access 800® TCNE1 Rim, SecureBolt™ and Mortise Exit Device offers the ability to seamlessly integr

Página 16 - Wire Harness

34) 9800 TCNE1 Series Trim Product Illustration (Rim and SecureBolt™)SecureBolt™ ShownTailpiecemust bein verticalpositionTrimGasketInsideofDoorCover(2

Página 17

45) Switch Settings (Rim, SecureBolt™ and Mortise)Switch Settings This device has been shipped from the factory with switch settings configuredas foll

Página 18 - (optional)

Verify hand and bevel of door. Door should be fitted and hung.Verify box label for size of exit device, function and hand. 6) Installation Instruction

Página 19

1. Check cylinder components. NOTE: Cylinders longer than 1-1/8" (29mm) will require collars. Refer toCylinder Collar Chart below.2. When r

Página 20 - 7.7) Cover Installation

6) Installation Instructions (Rim and SecureBolt™) CoverTrim AssemblyTailpiecemust bein verticalpositionBCAA(2) Finish WashersHead ScrewsBSolenoid Wir

Página 21

6) Installation Instructions (Rim and SecureBolt™) CoverTrim AssemblyTailpiecemust bein verticalpositionBCAA(2) Finish WashersHead ScrewsBSolenoid Wir

Comentários a estes Manuais

Sem comentários